Sensor compatibility and approval
Match a sensor to the required measurement, location and supported data path, then send a complete compatibility-review request.
Jump to section
Sensor support model
Sensor compatibility is evaluated by measurement capability, installation context, gateway path, data format, power/battery context, radio/network behavior and Platform integration needs—not by brand name alone.
Current public approval status
Not publicly listedNo public approved sensor model list is published yet. This means the exact model must be reviewed; it does not imply that every unlisted device is rejected.
Capability-based matching
Start with the monitoring question
1 · Measurement
Define the value needed and required units or derived calculations.
2 · Placement
Describe indoor/outdoor conditions, mounting, access, temperature and moisture exposure.
3 · Data path
Confirm protocol, radio/network behavior, gateway and Platform integration.
4 · Operation
Confirm battery/power method, reporting interval, maintenance and monitoring duration.
Measurement capability grid
Availability depends on the reviewed record
Temperature
Review exact modelConfirm units, range, accuracy, placement and reporting interval.
Relative humidity
Review exact modelConfirm range, accuracy, environmental exposure and temperature context.
Dew point
Where supportedMay be measured or calculated through a supported data path.
Absolute humidity
Where supportedMay be calculated when suitable temperature and humidity data are available.
Water presence
Review requiredConfirm sensing method, location, alert behavior and integration path.
Battery state
Where availableOnly shown when the reviewed sensor and integration expose a useful state.
Radio / gateway health
Where availableAvailability and interpretation depend on the supported radio path.
CO₂, VOC and others
Exact record onlyDo not assume support; send the exact capability and device record for review.
Request compatibility review
- 1
Identify the exact sensor brand, model and hardware revision.
- 2
Attach or link a product photo or verified datasheet if available.
- 3
List measurement capabilities, units and expected data format.
- 4
State the communication protocol and gateway already owned, if any.
- 5
Describe power or battery type and reporting expectations.
- 6
Describe intended location, quantity and monitoring goal.
- 7
Send the package to Humidynit before purchase or installation.
Send this information
- Brand and model
- Product photo or datasheet if available
- Measurement capabilities
- Communication protocol
- Power or battery type
- Intended location
- Number of sensors
- Gateway already owned, if any
- Monitoring goal
Connect a recommendation to Configure or Quote
After compatibility is confirmed, carry the approved model, quantity, locations, gateway path and monitoring goal into the quote request. A public quote does not approve substituted hardware, collect payment or create a Platform account.
Quote setup guide →Quote configurator help →